USETEXTLINKS = 1
STARTALLOPEN = 0
USEFRAMES = 0
USEICONS = 0
WRAPTEXT = 0
PRESERVESTATE = 1


foldersTree = gFld("<b>Products :</b>", "")


aux1 = insFld(foldersTree, gFld("Brass Cable Glands of various types with related accessories", "javascript:undefined"))
    
  aux2 = insFld(aux1, gLnk("B","CW Type Cable Glands", "http://www.hexworldwide.com/CWtype_Cable_Glands.htm"))
  
  aux2 = insFld(aux1, gLnk("B","E1W Industrial CableGlands", "http://www.hexworldwide.com/E1W_Industrial_cable_glands.htm"))
 
  aux2 = insFld(aux1, gLnk("B","A1/A2 Industrial Cable Glands", "http://www.hexworldwide.com/A1A2_Industrial_cable_glands.htm"))
 
  aux2 = insFld(aux1, gLnk("B","Alco Cable Glands", "http://www.hexworldwide.com/TRS_cable_glands.htm"))
 
  aux2 = insFld(aux1, gLnk("B","TRS Cable Glands", "http://www.hexworldwide.com/TRS_cable_glands.htm"))
 	  
 aux2 = insFld(aux1, gLnk("B","Weather proof Cable Glands ", "http://www.hexworldwide.com/weather_proof_cable_glands.htm"))
 
 aux2 = insFld(aux1, gLnk("B","Cable Gland Kit Glands", "http://www.hexworldwide.com/cable_glands_kit.htm"))
 
	  



aux1 = insFld(foldersTree, gLnk("B","Brass Electrical Components / Fittings", "http://www.hexworldwide.com/becf.htm","javascript:undefined"))
   
 

aux1 = insFld(foldersTree, gFld("Earthing Rods / Plates & Accessories", "javascript:undefined"))
    
	aux2 = insFld(aux1, gLnk("B","Solid Copper Earth Rods", "http://www.hexworldwide.com/scer1.htm"))
 
 	aux2 = insFld(aux1, gLnk("B","Swaged Earth Rods (250 Microns)", "http://www.hexworldwide.com/scer2.htm"))
 
 
 	aux2 = insFld(aux1, gLnk("B","Driving Head / Studs / Tips, Dowell Pins ", "http://www.hexworldwide.com/scer3.htm"))
 
 
	aux2 = insFld(aux1, gLnk("B","Couplers", "http://www.hexworldwide.com/scer4.htm"))
 
 
	aux2 = insFld(aux1, gLnk("B","Clamps ", "http://www.hexworldwide.com/scer5.htm"))
 
 
	aux2 = insFld(aux1, gLnk("B"," Air Terminal Base ", "http://www.hexworldwide.com/scer6.htm"))
 
 
	aux2 = insFld(aux1, gLnk("B","Copper Bonded Earth Rods ", "http://www.hexworldwide.com/scer7.htm"))
 
 
	aux2 = insFld(aux1, gLnk("B","Copper Bonded Earth Plates / Lattice Copper ", "http://www.hexworldwide.com/scer8.htm"))
 
 
	aux2 = insFld(aux1, gLnk("B"," Tape Clip / Saddles , Square Clamps ", "http://www.hexworldwide.com/scer9.htm"))
 

aux1 = insFld(foldersTree, gLnk("B","Switch Socket Boxes", "http://www.hexworldwide.com/pgs.htm"))	


aux1 = insFld(foldersTree, gFld("Cable Terminal Ends, Cable Lugs, Cable Shoes, Inline Connectors and Links", "javascript:undefined"))
    aux2 = insFld(aux1, gLnk("B","Crimping Type Copper Tubular Cable Terminal Ends", "http://www.hexworldwide.com/lugs1.htm"))
      
    
	aux2 = insFld(aux1, gLnk("B","Crimping Type Copper Tubular Cable Terminal Ends - Bell Mouth ", "http://www.hexworldwide.com/lugs2.htm"))
 	
	aux2 = insFld(aux1, gLnk("B","Alumiuim - Copper BI-Metal Terminals", "http://www.hexworldwide.com/lugs51.htm"))
 
 
	aux2 = insFld(aux1, gLnk("B","Alumiuim - Copper BI-Metal Connector/Splice ", "http://www.hexworldwide.com/lugs52.htm"))
 
	aux2 = insFld(aux1, gLnk("B"," Tinned Copper Tubular Cable Lugs Without Inspection hole ", "http://www.hexworldwide.com/lugs3.htm"))
 
	aux2 = insFld(aux1, gLnk("B","   Transformer Copper Terminal Ends ", "http://www.hexworldwide.com/lugs4.htm"))
 
	
	aux2 = insFld(aux1, gLnk("B","   Long Barrel Tinned Copper Cable Terminal Ends ", "http://www.hexworldwide.com/lugs5.htm"))
 
	aux2 = insFld(aux1, gLnk("B","   2 Hole extended Palm Lugs without Inspection Hole ", "http://www.hexworldwide.com/lugs6.htm"))
 
	aux2 = insFld(aux1, gLnk("B"," Solder Lugs  ", "http://www.hexworldwide.com/lugs7.htm"))
 
	aux2 = insFld(aux1, gLnk("B"," Tubular Compression Cable Lugs ", "http://www.hexworldwide.com/lugs8.htm"))

	aux2 = insFld(aux1, gLnk("B","Tubular Cable Lugs without Insulation ", "http://www.hexworldwide.com/lugs9.htm"))
 
	aux2 = insFld(aux1, gLnk("B","Heavy Duty lugs for Compact XLPE Cable ", "http://www.hexworldwide.com/lugs10.htm"))

	aux2 = insFld(aux1, gLnk("B","  Copper Connectors with Solid Barrier ", "http://www.hexworldwide.com/lugs11.htm"))
 
	aux2 = insFld(aux1, gLnk("B","Crimping Type Copper Tubular Cable Terminal Ends - Bell Mouth ", "http://www.hexworldwide.com/lugs12.htm"))
 
	aux2 = insFld(aux1, gLnk("B","  Compression Full tension Sleeve  ", "http://www.hexworldwide.com/lugs13.htm"))
 
	aux2 = insFld(aux1, gLnk("B","  Straight Splice for medium Voltage Cable ", "http://www.hexworldwide.com/lugs14.htm"))
 
	aux2 = insFld(aux1, gLnk("B","  Copper End Sealing Ferrules ", "http://www.hexworldwide.com/lugs15.htm"))

 
	aux2 = insFld(aux1, gLnk("B"," Tubular Plastic End Sleeves ", "http://www.hexworldwide.com/lugs16.htm"))
	
	aux2 = insFld(aux1, gLnk("B"," Soldering Type Copper week back ferrules ", "http://www.hexworldwide.com/lugs17.htm"))
 
	aux2 = insFld(aux1, gLnk("B"," Tinned Screw Sleeve ", "http://www.hexworldwide.com/lugs18.htm"))
 
	aux2 = insFld(aux1, gLnk("B","  Punched Copper Cable-Lugs Bolted with 4 Screw ", "http://www.hexworldwide.com/lugs19.htm"))
 
	aux2 = insFld(aux1, gLnk("B","   Copper /Tinned 'C' Connectors ", "http://www.hexworldwide.com/lugs20.htm"))
 
	aux2 = insFld(aux1, gLnk("B","  Compression Joints ", "http://www.hexworldwide.com/lugs21.htm"))
 
	aux2 = insFld(aux1, gLnk("B","  Aluminium Compression Joints ", "http://www.hexworldwide.com/lugs22.htm"))
 
	aux2 = insFld(aux1, gLnk("B","  Tinned Aluminium Cable Terminal Ends ", "http://www.hexworldwide.com/lugs23.htm"))
	
	aux2 = insFld(aux1, gLnk("B","  Tinned Aluminium Cable Connectors/Links", "http://www.hexworldwide.com/lugs24.htm"))
	
	aux2 = insFld(aux1, gLnk("B","Aluminium Sleeve for Low/Half Voltage Splicing of Aluminium Cable ", "http://www.hexworldwide.com/lugs25.htm"))
 
	aux2 = insFld(aux1, gLnk("B","Aluminium splice for LV & MV (upto 30 KV), for Dissimilar Cable Cross Sectional Area", "http://www.hexworldwide.com/lugs27.htm"))
 
	aux2 = insFld(aux1, gLnk("B","Aluminium Connectors for Termination of 2,3 and 4 Core sector shaped cable ", "http://www.hexworldwide.com/lugs28.htm"))

	aux2 = insFld(aux1, gLnk("B","  Straight Terminal/Lugs for Termination 2,3 and 4Core sector Shaped Cable ", "http://www.hexworldwide.com/lugs29.htm"))

	aux2 = insFld(aux1, gLnk("B","Ring Type Tinned Copper Cable Terminal Ends ", "http://www.hexworldwide.com/lugs30.htm"))
	aux2 = insFld(aux1, gLnk("B"," Ring Type Insulated tinned Copper Terminal Ends ", "http://www.hexworldwide.com/lugs31.htm"))
	aux2 = insFld(aux1, gLnk("B"," Fork Type Tinned Copper Cable Terminal Ends ", "http://www.hexworldwide.com/lugs32.htm"))
	aux2 = insFld(aux1, gLnk("B"," Fork type Insulated tinned Copper Cable Terminal Ends   ", "http://www.hexworldwide.com/lugs33.htm"))
	aux2 = insFld(aux1, gLnk("B"," Pin type Tinned Copper Cable Terminal Ends   ", "http://www.hexworldwide.com/lugs34.htm"))
	aux2 = insFld(aux1, gLnk("B"," Pin Type Insulated tinned Copper cable Terminal Ends  ", "jhttp://www.hexworldwide.com/lugs35.htm"))
	aux2 = insFld(aux1, gLnk("B"," Copper  Reducer Type Terminal Ends ", "http://www.hexworldwide.com/lugs36.htm"))
	aux2 = insFld(aux1, gLnk("B"," Receptacles Rolled Type ", "http://www.hexworldwide.com/lugs37.htm"))
	aux2 = insFld(aux1, gLnk("B","  Receptacles Rolled Type with Tongue ", "http://www.hexworldwide.com/lugs38.htm"))
	aux2 = insFld(aux1, gLnk("B","  Receptacles Rolled type 90 Degrees ", "http://www.hexworldwide.com/lugs39.htm"))
	aux2 = insFld(aux1, gLnk("B","  Receptacles Box type", "http://www.hexworldwide.com/lugs40.htm"))
	aux2 = insFld(aux1, gLnk("B"," Receptacles Box type with Tongue", "http://www.hexworldwide.com/lugs41.htm"))
	aux2 = insFld(aux1, gLnk("B"," Receptacles Box type 90 Degrees ", "http://www.hexworldwide.com/lugs42.htm"))
	aux2 = insFld(aux1, gLnk("B","  Butt Connectors ", "http://www.hexworldwide.com/lugs43.htm"))
	aux2 = insFld(aux1, gLnk("B"," Receptacles (with Solid Dielectric insulation) ", "http://www.hexworldwide.com/lugs44.htm"))
	aux2 = insFld(aux1, gLnk("B","  Tabs ", "http://www.hexworldwide.com/lugs45.htm"))
	aux2 = insFld(aux1, gLnk("B","Receptacles Non-Insulated, Brass tinned", "http://www.hexworldwide.com/lugs46.htm"))
	aux2 = insFld(aux1, gLnk("B"," Receptacles (DIN 46245)", "http://www.hexworldwide.com/lugs47.htm"))
	aux2 = insFld(aux1, gLnk("B","Receptacle ", "http://www.hexworldwide.com/lugs48.htm"))
	aux2 = insFld(aux1, gLnk("B","Standard Connectors Flat Type-Plain /Tinned Copper ", "http://www.hexworldwide.com/lugs49.htm"))
	aux2 = insFld(aux1, gLnk("B","Standard Flexible Connectors Crimped & Termination  ", "http://www.hexworldwide.com/lugs50.htm"))


  
  
  aux1 = insFld(foldersTree, gFld("Plumbing & Sanitary Fittings", "javascript:undefined"))
    aux2 = insFld(aux1, gLnk("B","Sanitary Fittings", "http://www.hexworldwide.com/sanitary/Sanitary_Fittings.htm"))
     
    aux2 = insFld(aux1, gLnk("B","Compression Fittings", "http://www.hexworldwide.com/sanitary/Compression_Fittings.htm"))
 
	aux2 = insFld(aux1, gLnk("B"," Flare Fittings", "http://www.hexworldwide.com/sanitary/Flare_Fittings.htm"))
	aux2 = insFld(aux1, gLnk("B","Gas Pneumatic Brass Fittings ", "http://www.hexworldwide.com/sanitary/Gas_Pneumatic_Fittings.htm"))
	aux2 = insFld(aux1, gLnk("B","Pipe Hose Fittings", "http://www.hexworldwide.com/sanitary/Pipe_Hose_Fittings.htm"))
	aux2 = insFld(aux1, gLnk("B","Other Fittings ", "http://www.hexworldwide.com/sanitary/other_Fittings.htm"))
	
	

aux1 = insFld(foldersTree, gLnk("B","Earthing Clamps", "http://www.hexworldwide.com/ec.htm"))
    	
	

aux1 = insFld(foldersTree, gLnk("B","Metal Components", "http://www.hexworldwide.com/mc.htm"))
    
 
	
aux1 = insFld(foldersTree, gLnk("B","Brass Conduit Fittings like Bushes, Adaptors", "http://www.hexworldwide.com/bcf.htm"))
   	
	
aux1 = insFld(foldersTree, gLnk("B","Crimping Tool Systems", "http://www.hexworldwide.com/ct.htm"))

   
aux1 = insFld(foldersTree,gLnk("B","Special Products", "http://www.hexworldwide.com/sp.htm"))
  
aux1 = insFld(foldersTree, gLnk("B","Screw Sleeves", "http://www.hexworldwide.com/ssc.htm"))
    	
aux1 = insFld(foldersTree, gFld(" Silver Laminated Electrical Brass / Copper Components ", "javascript:undefined"))
    
	aux2 = insFld(aux1, gLnk("B","Silver Bullion Bar ", "http://www.hexworldwide.com/silverbb.htm"))
	aux2 = insFld(aux1, gLnk("B","Silver Semi-finished Products ", "http://www.hexworldwide.com/silversfp.htm"))
    aux2 = insFld(aux1, gLnk("B","Contact Material for low-tension Switchgear", "http://www.hexworldwide.com/silverlts.htm"))
	aux2 = insFld(aux1, gLnk("B","Contact Material for high-tension Switchgear ", "http://www.hexworldwide.com/silverhts.htm"))
	aux2 = insFld(aux1, gLnk("B","Silver Brazing Alloys ", "http://www.hexworldwide.com/silversba.htm"))
	aux2 = insFld(aux1, gLnk("B","Welding Consumables", "http://www.hexworldwide.com/silverwc.htm"))
	aux2 = insFld(aux1, gLnk("B","Extruded profile and sections ", "http://www.hexworldwide.com/silverepc.htm"))
	
	
aux1 = insFld(foldersTree, gLnk("B","Split Bolt Connectors / Line Taps", "http://www.hexworldwide.com/sbc.htm"))
   
aux1 = insFld(foldersTree, gLnk("B","Stainless Steel Cable Ties", "http://www.hexworldwide.com/cabletie.htm"))
	
aux1 = insFld(foldersTree, gLnk("B","Mechanical Connectors", "http://www.hexworldwide.com/mechcon.htm"))

aux1 = insFld(foldersTree, gLnk("B","Conduit Fittings like Circular Junction Boxes, etc.", "http://www.hexworldwide.com/conduit.htm"))
aux2 = insFld(aux1, gLnk("B"," PVC Coated Galvanised Flexible Conduit (as per BS 731 part) ", "http://www.hexworldwide.com/conduit1.htm"))
aux2 = insFld(aux1, gLnk("B"," Dark Flexible Conduit System ", "http://www.hexworldwide.com/conduit2.htm"))
aux2 = insFld(aux1, gLnk("B"," Liquid Tight Flexible PVC Coated Galvanised Conduit ", "http://www.hexworldwide.com/conduit3.htm"))
      
    aux2 = insFld(aux1, gLnk("B"," Flexible Corrugated PVC Conduit ", "http://www.hexworldwide.com/conduit4.htm"))
	
	aux2 = insFld(aux1, gLnk("B","PVC Flexible Corrugated Cable Protection Hose Pipe", "http://www.hexworldwide.com/conduit5.htm"))
      
    aux2 = insFld(aux1, gLnk("B"," Two Pies Adaptor / Connector ", "http://www.hexworldwide.com/conduit6.htm"))
	
	aux2 = insFld(aux1, gLnk("B","One Pies Adaptor / Connector ", "http://www.hexworldwide.com/conduit7.htm"))
      
    aux2 = insFld(aux1, gLnk("B"," Connector / Assembly ", "http://www.hexworldwide.com/conduit8.htm"))
	
	aux2 = insFld(aux1, gLnk("B","Iron & Steel Conduit Fittings ", "http://www.hexworldwide.com/conduit9.htm"))
      
    aux2 = insFld(aux1, gLnk("B","   Circular Junction Boxes ", "http://www.hexworldwide.com/conduit10.htm"))
	
	aux2 = insFld(aux1, gLnk("B"," Looping Box ", "http://www.hexworldwide.com/conduit11.htm"))
      
    aux2 = insFld(aux1, gLnk("B","Covers", "http://www.hexworldwide.com/conduit12.htm"))
	
	aux2 = insFld(aux1, gLnk("B","Elbow", "http://www.hexworldwide.com/conduit13.htm"))
      
    aux2 = insFld(aux1, gLnk("B","Bends", "http://www.hexworldwide.com/conduit14.htm"))
	
	aux2 = insFld(aux1, gLnk("B","Tees", "http://www.hexworldwide.com/conduit15.htm"))
      
    aux2 = insFld(aux1, gLnk("B"," Coupling ", "http://www.hexworldwide.com/conduit16.htm"))
	
	aux2 = insFld(aux1, gLnk("B"," Brass Bush ", "http://www.hexworldwide.com/conduit17.htm"))
      
    aux2 = insFld(aux1, gLnk("B","   Saddle ", "http://www.hexworldwide.com/conduit18.htm"))
	
	aux2 = insFld(aux1, gLnk("B"," Lock Ring ", "http://www.hexworldwide.com/conduit19.htm"))
      
    aux2 = insFld(aux1, gLnk("B"," Hexagon Lock Nut ", "http://www.hexworldwide.com/conduit20.htm"))
	
	aux2 = insFld(aux1, gLnk("B","Hook", "http://www.hexworldwide.com/conduit21.htm"))
      
    aux2 = insFld(aux1, gLnk("B","  Crampets ", "http://www.hexworldwide.com/conduit22.htm"))
	
	aux2 = insFld(aux1, gLnk("B","  Conduit Unions ", "http://www.hexworldwide.com/conduit23.htm"))
      
    aux2 = insFld(aux1, gLnk("B","   Reducers ", "jhttp://www.hexworldwide.com/conduit24.htm"))
	
	aux2 = insFld(aux1, gLnk("B","   Adaptors ", "http://www.hexworldwide.com/condui25.htm"))
      
    aux2 = insFld(aux1, gLnk("B"," Cable Trunking ", "http://www.hexworldwide.com/conduit26.htm"))
	aux2 = insFld(aux1, gLnk("B"," Cable Ducts / PVC Channels / Panel Trunkings ", "http://www.hexworldwide.com/conduit27.htm"))
	aux2 = insFld(aux1, gLnk("B","Fasteners", "http://www.hexworldwide.com/conduit28.htm"))
	aux2 = insFld(aux1, gLnk("B","Zinc Plated Fasteners   ", "http://www.hexworldwide.com/conduit29.htm"))
	aux2 = insFld(aux1, gLnk("B","Strip Polyethylene Connector ", "http://www.hexworldwide.com/conduit30.htm"))
	aux2 = insFld(aux1, gLnk("B","Saddle Connectors ", "http://www.hexworldwide.com/conduit31.htm"))